TD Pilot - Charging and LED Status
TD Pilot - Charging and LED Status
Charging the TD Pilot
- Connect the Power cable to the Power Connector on the TD Pilot device.
- Connect the Power adapter to an electrical outlet and charge the TD Pilot device until the battery is fully charged.
The LED Status
The status LED will shine with three (3) different colors:
- Fault — Red
- Charging — Blue
- Power On — Pulsing green
when the unit is charging, the LED will be blue, regardless of whether the TD Pilot is powered On
or not. If there is a fault, the LED will be red, regardless of any other conditions.
Related Articles
TD Pilot - Batteries
TD Pilot Batteries The TD Pilot device (which includes the TD Pilot case and the iPad) has two built-in batteries. One battery located in the iPad and the other in the TD Pilot Base. To check the battery status of the iPad in the TD Pilot In TD Talk ...
TD Pilot Power Management Best Practice
TD Pilot Power Management Best Practice When to Charge It would be best to leave the TD Pilot turned on and plugged into the charger over night, or whenever you are not using it. The only reason to turn it off is for storage or transport (i.e. ...
Getting Started Guide - TD Pilot and TD Talk
Quick start guide to get you up and running with TD Pilot and TD Talk
TD Pilot - Adjustable Stand
TD Pilot - Adjustable Stand Adjusting the Stand for the TD Pilot The TD Pilot has a built-in Adjustable Stand, which allows the user to place the TD Pilot device in more positions for the best possible Eye tracking. Fold out the Adjustable Stand from ...
TD Pilot - Starting and First Start Up
TD Pilot - Starting and First Start Up First Start Up When you start your TD Pilot for the first time, you are required to go through the Apple out of the box experience. At the end of setup the TD Pilot. specific apps will be installed on the Apple ...